Type 2 EV Charging Cable 22kW — 32A, IP55, IEC 62196-2

✅ Compatible: All Tesla models with Type 2 charging port · All Tesla Wall Connectors
🇦🇺 Aus-Stocked — Ships within 24 hrs on business days
📦 Est. delivery: 3–8 business days to most AU addresses

• 22kW three-phase AC charging, 32A rated — charges a Tesla Model Y from flat to 80% in under 5 hours at home, faster at a 22kW public station
• Compatible with all Tesla models in Australia — plug in via a Type 2 to NACS adapter; also works natively with BYD, Polestar 2, MG ZS EV, Hyundai IONIQ 6, Kia EV6 and any Type 2 EV
• IP55 weatherproof · TPE cable jacket · CE and TÜV certified — handles Australian summer heat, coastal salt air, and winter rain without cracking or degrading
• Aus-Stocked in Australia — ships within 24 hrs on business days, delivered in 3–8 business days to most AU addresses
• What's included: 1 × 5-metre Type 2 to Type 2 charging cable (IEC 62196-2, male-to-male)
• Trusted by EV owners across Australia — backed by Tes Accessories AU-based support

The Type 2 EV Charging Cable 22kW is the most versatile AC charging cable for electric vehicle owners in Australia. Rated to 32A three-phase (22kW), it supports home wallbox charging and all public Type 2 AC stations on a single cable — CE and TÜV certified for Australian electrical safety standards.

For Tesla owners, this cable is compatible with Tesla Model 3 (all variants, 2019–present) and Tesla Model Y (all variants, 2021–present including Juniper 2025+) via a Type 2 to NACS adapter. Tesla's onboard AC charger self-limits to 11kW — so the 22kW cable is fully backward compatible and will never exceed the vehicle's rated input. For non-Tesla EVs with a native Type 2 port, no adapter is required.

The 5-metre cable length covers most Australian home setups, with enough slack to reach a garage wallbox to vehicle without strain. The TPE outer jacket remains flexible in cold mornings and resists UV degradation through Australian summers. IP55 weatherproofing — dust-protected and water-jet resistant — makes this cable equally at home at a beach-town public charger or an inner-city parking station.

What's included: 1 × 5-metre Type 2 EV charging cable (IEC 62196-2, male-to-male), CE certified, TÜV certified. No adapter or carry bag included.

Frequently Asked Questions

Q: What EV charging cable do I need for home charging in Australia?
A: For home charging in Australia, the recommended setup is a Mode 3 Type 2 cable connected to a dedicated wallbox. This 22kW cable works with any Type 2 home wallbox and all public Type 2 AC chargers in Australia. Your vehicle's onboard charger regulates the draw — using a 22kW cable on a 7kW charger simply limits the session to 7kW with no overload risk.

Q: Is this Type 2 charging cable compatible with Tesla Model Y in Australia?
A: Yes. Tesla Model Y (all variants, including the 2025 Juniper refresh) has a Type 2 charge port in Australia. This cable connects directly to the Model Y without any adapter. The vehicle's onboard AC charger limits charging to 11kW — the 22kW cable's rating is no concern as the car manages its own draw.

Q: What is the difference between IP55 and IP65 for EV charging cables?
A: IP55 provides protection against dust ingress and water jets from any direction — fully adequate for Australian outdoor charging, including coastal environments, rain, and high humidity. IP65 adds complete dust exclusion. Both ratings are appropriate for outdoor EV charging in Australia; IP55 is the standard for CE/TÜV certified cables at 22kW.

Q: Can I use a 22kW cable on a 7kW single-phase home wallbox?
A: Yes. This cable supports single-phase charging (up to 7.4kW at 32A) as well as three-phase (up to 22kW at 32A). On a single-phase 7kW wallbox, it simply draws at that rate. The same cable works across all charging scenarios — home wallbox, workplace charger, or public AC station.

Browse the full EV Charging range at Tes Accessories.